JEEP WRANGLER
El t i
Electric
Installation of
Magnetic
Control
4 Connect white and brown signal wire
Power
B
d
4.Connect white and brown signal wire
with wired magnetic induction module .
Board
Switch
1. Pull out the fuse and connect the
battery wire.
B
2 Connect the control wire and arrange all function wires to the pointed positions
5. Insert back the fuse and sort out
the wires.
Battery
3. Connect motor wire and LED lamp wire.
2. Connect the control wire and arrange all function wires to the pointed positions.
Chassis
Controller
Step 1: Find out the control input wire and pull out the fuse (ensuring
p
p
p
(
g
circuit safety during installation) and connect the positive and
negative pole of wire harness to vehicle battery respectively.
Note: Battery wire can not be modified privately.
16
www.tmax.biz