Check for parts online at www.HuntRiversEdge.com or call 800-345-6007 M-F 8-5
16
Operator's Manual
LOCKDOWN 21-FT WIDE Ladder Stand
FIGURE 1
15. Before uprighting the stand to the tree, you must
attach the two long straps (55) to the assembled
treestand. Begin by feeding one end of each
strap through the three strap guides (23) under
the platform and at the top of the ladder on both
sides. SEE FIGURE 1 and DETAIL A.
Attach the looped ends of the straps together
near the center of the ladder with the carabiner
on the end of the tether rope (56). SEE FIGURE 1
and DETAIL B.
Run the opposite end of each strap down to the
ladder ratchet (28) on either side of the ladder.
Run the strap down through the center slot in
the ratchet and “ratchet” just enough to loosely
hold the strap in place. They do not need to be
tight. This is only temporary to keep them out of
the way while you upright the stand to the tree.
SEE FIGURE 1 and DETAIL C.
Lastly, run the tether rope (56) down the
length of the ladder, wrap around the Silent
LadderLocks (35 and 37) that are near the ladder
ratchets (28) and loosely tie in place. SEE FIGURE
1 and DETAIL C. You are now ready to upright
the ladder. Follow setup and use instructions on
following pages.
DE
TAIL B
DE
TAIL C
55
23
23
23
56
28
37
35
Carabiner
DE
TAIL A
