manualshive.com logo in svg

TMA RIVERS EDGE BABY BIG FOOT RE504, Operator'S Manual, Page: 12 / 20

Share
Download
TMA RIVERS EDGE BABY BIG FOOT RE504 Operator'S Manual Download Page 12

Check for parts online at 

www.huntriversedge.com

 or call 800-450-EDGE (3343) M-F 8-5

Check for parts online at 

www.huntriversedge.com

 or call 800-450-EDGE (3343) M-F 8-5

12

Operator's Manual 

Rivers Edge Hang-On Stands

AssEMBlY INsTRuCTIONs (RE509)

Tools needed – two 7/16" wrenches 
IMPORTAnT AssEMBLY TIP:  do not tighten any nut and bolt combi-

nations completely until all parts are assembled together! Finger 

tighten plus one turn of a wrench only! This will temporarily hold the 

lock nut on the bolt while helping alignment of all parts! After all parts 

are assembled together, all nut & bolt combinations must be com-

pletely tightened.

1.  Bolt the metal seat frame (C30) onto the seat post (CXR25) using the 

(2) provided 1/4-20 x 2-1/2" bolts, locknuts and (6) nylon washers. 

sEE fIGuRE 1.  DO NOT tighten all nut & bolt assemblies 

completely! 

2.  Attach the tree hugger to the seat post using (1) provided 5/16-18 

x 2" bolt, locknut and steel washer. sEE fIGuRE 1.

3.  Bolt cables (48212) onto platform (CXR21) using the (2) provided 

1/4-20 x 1-1/2" bolts, locknuts and steel washers. sEE fIGuRE 2. 

You must now tighten all nut & bolt assemblies. Be sure not to 

over tighten or crush tubing when tightening!

 nOTE: 

using powder graphite lubricant during assembly of moving parts 

will help eliminate noise during use! 

4.  Insert the removable/pivoting armrests (CXR26) into each armrest 

receiver on the seat post by pressing snap button inward and 

snapping button into holes of receivers. sEE fIGuRE 3. Thread bolt 

knob into treaded portion of receiver to tighten up armrest to help 

prevent movement/noise. 

  Armrests can be inserted into receivers and positioned all four 

directions if desired. Armrests can also be removed if desired.  

Repositioning of armrest will allow for easier entry/exit into your 

treestand and can make for a slimmer profile for backpacking.

Figure 1

1/4-20 

x 2-1/2" 

bolts

nylon washers

5/16-18 locknut

1/4-20 locknuts

nylon washers

nylon washers

5/16-18 x 2" bolt

steel washer

Figure 2

steel washer

locknut

platform cable

1/4-20 x 1-1/2" bolts

Figure 3

armrests

5/16-18 x 1/2" bolt knob

snap button 

holes on each 

side of receivers

Summary of Contents for RIVERS EDGE BABY BIG FOOT RE504





















Reviews:

No comments