Product Name: Remote Ultra Ultra RGB+CCT LED Dimming Zigbee Remote
Product Code: K30-2052Z
How to Check Whether the Remote Belongs to a Network or not
Battery Power Monitor Function
The remote will report battery power value to the coordinator under following situations:
•
When powered on.
•
When operating the switch to send data packets (over 4 hours since last operation).
•
When added to the network by a coordinator.
Other Information
Specifications:
•
Zigbee RGB+CCT+DIM remote based on Zigbee 3.0
•
High sensitive & high stable touch colour wheel, fast & precise colour control
•
Battery powered remote with low power consumption
•
Enables to pair Zigbee lighting devices through touchlink commissioning
•
Supports find and bind mode to pair with Zigbee lighting devices
•
Supports 3 groups for binding max. 30 lighting devices
•
With 6 preset scenes, enables to save and recall 5 scenes
•
2.4 GHz global operation
•
Transmission range up to 30m
•
Compatible with universal Zigbee Gateway products
•
Enables to bind and control universal DIM, CCT, RGB, RGBW and RGB+CCT Zigbee lighting devices
Zigbee Clusters Supported by This Remote Are As Follows:
Input clusters:
•
Basic
•
Power Configuration
•
Identify
•
Diagnostics
Output clusters:
•
Identify
•
Group
•
Scene
•
On/off
•
Level control
•
OTA
•
Colour control
OTA
The remote supports firmware updating through OTA, and will acquire new firmware from Zigbee controller
or hub every 10 minutes automatically.
1
Short press any other buttons except group buttons, indicator blinking means the wall switch has already
been added to a network, no blinking of indicator means the wall switch does not belong to any
network.
