172-65627M-09 (SQ10) 18 Oct 2021
13
Touch Panel Display
Items used during normal operation
The following items can be operated with
the touch panel display to;
1. Starting operation of the unit,
2. Stopping operation of the unit, or
3. Adjusting the set (target) temperature.
The three buttons shown in the figure to
the right are used during normal operation.
No.
Name
Description
1
Operation Display
and START Button
Starts automatic operation (automatic temperature
adjustment) or ready to start automatic operation.
・
The button is activated by touching it for 0.5 seconds.
・
: In operation (blue),
: Not in operation (gray)
2
Operation Display
and STOP Button
Stops automatic operation, also for emergency use.
・
The button is enabled by touching it for 0.5 seconds.
・
: In operation (gray),
: Not in operation (red)
3
SET TEMP Display
and SET TEMP
Adjustment Button
Displays the current set (target) value for the water
temperature. Set temperature can be adjusted by
touching the displayed numbers.
・
The set temperature can be adjusted only when adjustment
input is carried out directly via this control panel.
(However, operations such as set temperature display and
adjustment, as described in the "Installation/ Commissioning"
chapter, cannot be performed via external input/output.)
・
When the set temperature can be adjusted via this control
panel, the numbers will be displayed in green. When
adjusting the set temperature via an external signal, the
numbers will be displayed in white.
Set temperature adjustment
via external signal
(Green)
Set temperature adjustment
via control panel
(White)
1
2
3
