172-65393MA-03 (SS1VG) 4 Aug 2015
5
Specifications
Install properly and DO NOT use this product outside the recommended
operating pressure, temperature and other specification ranges.
Improper use may result in such hazards as damage to the product or
malfunctions which may lead to serious accidents. Local regulations
may restrict the use of this product to below the conditions quoted.
CAUTION
DO NOT use this product in excess of the maximum operating pressure
differential; such use could make discharge impossible (blocked).
CAUTION
Use only under conditions in which no freeze-up will occur. Freezing
may damage the product, leading to fluid discharge, which may cause
burns or other injury.
CAUTION
Refer to the product nameplate for detailed specifications.
Nominal Diameter
Maximum Allowable
Pressure*
Maximum Allowable
Temperature (TMA)*
Maximum Differential
Pressure***
Maximum Operating
Temperature
Valve No.**
Production Lot No.
Model
* Maximum allowable pressure (PMA) and maximum allowable temperature (TMA) are PRESSURE
SHELL DESIGN CONDITIONS,
NOT
OPERATING CONDITIONS.
** Valve No. is displayed for products with options. This item is omitted from the nameplate when
there are no options.
Minimum Required Condensate Load
For products with a metal valve seat, a minimum required condensate load is
necessary to maintain a liquid seal. There is a chance of air/gas leak if the
condensate load falls below this rate. Please refer to the chart below.
Model
SS1VG-M
Minimum Required Condensate Load
0.5 kg/h (1 lb/h)
