Instruction manual
45
BALANCE
The
BALANCE
channel control is used to regulate the balance between the right and left channels for an optimal
stereo effect. Turning the control to the right reduces the volume of the left channel and vice versa. Normally, you
should leave the control in the central position.
Audio balance
The
BASS
and
TREBLE
tone controls allow for reduction or raising of the low-pitched or high-pitched tones. Set
the audio for the
TLS
®
devices
according to the acoustics in the listening room or according to your personal
taste. When you reach the maximum value using the
TAPE/CD
control, this can result in distortions in playback
which can damage the speaker system.
Note:
The speakers can be damaged by distorted playback. Never operate the device with distortions for
long periods. Reduce the overall volume so that the distortions cease.
External connections
MIC or (device dependent) MIC 1 and MIC 2
Wired microphones with a 6.3 mm jack can be connected to the device using the
MIC
or
MIC 1
and
MIC 2
con-
nections.
LS-OUT
The
LS PLUS
active
TLS
®
M100
can be connected using the
LS OUT
connection. The
LS OUT
connection offers
the option of stereo operation. For this, please connect both devices before turning them on.
LS IN (M100 LS PLUS only)
The
LS PLUS
active
TLS
®
M100
can be connected using the
LS IN
connection. The
LS IN
connection of-fers the
option of stereo operation. For this, please connect both devices before turning them on.
Summary of Contents for 754600
Page 80: ......
