background image

1.   TIME:

- Press it once to view the year.
- Press and hold it for 2 seconds to enter the time setting
  mode.

2.    ALARM:

- Press it to switch to alarm and temperature alarm.
- In alarm mode, press and hold it for 2 seconds to enter
  the alarm and pre-alarm setting mode.

3.   UP:

- In normal time mode, press it to choose between

 channel (1), (2) and (3).

- In setting mode, press it to increase the setting value.
- In alarm mode, press it to turn on/off alarm and snooze.

4.   DOWN:

- Press and hold it for 3 seconds, release, then press it
  to change the weather indicator.
- In alarm mode, press it to turn on/off alarm and snooze.

5.    HISTORY:

- Check the past 24 hours pressure records.

6.   MAX/MIN :

- Press it once to check max./ min. temperature record.
- Press and hold it for 3 seconds to delete the max. and
  min. record.

7.   SNOOZE / LIGHT:

- Press it once, EL backlight keeps on for 5 seconds.

SPECIFICATIONS

(The humidity data is for C-8105 only)

MAIN UNIT

Indoor temperature measuring range:      -5 

º

C to +50 

º

C

Recommended operating range:      0 

º

C to +45 

º

C

Temperature resolution:

    0.1 

º

C / 1

º

F (above 0

º

C)

     1 

º

C / 

º

F (below 0 

º

C)

Indoor relative humidity measuring range: 20% RH to 90% RH
Recommended operating range:

     20% RH to 90% RH

Resolution:

     1% RH

24

p.

3

p.

Summary of Contents for CKC8105















Reviews: