Page 22
EFIS Setup Menu
Remote Compass & CO Guardian
5.
Set up Declination, Inclination and Total Field in the INTEGRA in agreement with the website. Obtained values from the website must be
rounded for inserting to the INTEGRA: Round seconds (sign “) to minutes (sign ‘) for Declination and Inclination: 0”-29”-> +0’, 30”-
59”-> +1’. Round hundredth to integers for Total Field: 0,00 - 0,49 -> 0; 0,50 – 0,99 -> 1
e.g.:
Declination 3° 29' 55" rounded to 3° 30'
Inclination 66° 8' 9" rounded to 66° 8'
Total Field 49,007.81 nT rounded to 49,008 nT
(note: sign
,
in value for Total Field means separator for thousands)
6.
Set up in the INTEGRA position of Remote Compass (“Build In”) according to its placing in the aircraft.
Menu Calibration
In this menu you can calibrate your Remote Compass.
Orient your plane in a known direction, preferably on a compass rose at the airport. Turn aircraft to the north direction. Stabilize the aircraft at
horizontal position and keep the aircraft in this position during all calibration. Press OK. Integra start with calibration.
Turn aircraft in agreement with instruction on Integra. You will turn aircraft to the west, south and east.
After calibration will be displayed information about status of calibration.
There can be some mistake during calibration. Integra show you error message with error description.
CO Guardian
You can connect and disconnect the external CO Guardian device on port COM 1or COM 2.
CO guardian monitors the quantity of CO
2
in the cockpit. If the quantity of CO
2
exceeds the safety limit the
INTEGRA will show you an alert message.
•
Menu CO Guardian
•
Not connected
•
Com 1
•
Com 2
Summary of Contents for Integra Efis TL-6560
Page 1: ......
Page 7: ...Page 6 EFIS Setup Menu Introduction EFIS Setup Menu...
Page 27: ...Page 26 Autopilot Section Introduction Autopilot optional function...
Page 38: ......
