10
Carbon Trinity
Hybrid Valve Amplifier
Carbon Trinity
Hybrid Valve Amplifier
Your Carbon Trinity should give you years of trouble-
free audio fitness, but if it isn’t performing as it should, it
could be due to one of these simple problems. If you’re
still having trouble, please contact your authorised
dealer or service centre.
Dr Feelgood
SYMPTOM
DIAGNOSIS
CURE
Won’t turn on when the
POWER switch is pressed
Power adaptor isn’t connected properly Mains supply is off
Make sure the power cable is firmly plugged in and mains
is switched on
No sound
The volume control is turned all the way to the left
The connection wires are not connected securely to the
INPUT terminals.
Speakers are not connected properly
Turn the control to the right to crank up the volume
Make sure the cords are fully inserted at both ends
Check that the speaker cables are connected correctly (pg4)
No sound from left or right
speaker
One or both speakers are not properly connected
Check both speaker cables and ensure they’re connected
securely
Check the connections between your source and amplifier
are correctly and firmly connected
The acoustic image is unsta-
ble (sounds unnatural or
weirdly bass light)
The positive and negative polarities of the unit and speak-
ers aren’t matched
Remove the speaker cables and re-connect them correctly
(pg4)
iPod volume doesn’t effect
audio volume
iPod volume is already at maximum output
Use your Carbon Trinity’s amplifier volume control when
your iPod is docked