18
D1
D2
D3
D2
S3
S2
S1
D2
3.3.9
3.3.10
3.3.11
3.3.12
3.3 Areas of application
Rivet
Procedure
Tool pair
Stanzniet
Ø 3,2 mm
Ø 3,5 mm
Pressing out from two-ply sheet connections
D1
1
+ D2
Pressing out from 3-ply sheet connections or other thicker
connections
D2 + D3
1
Setting 3.2 mm punch rivets
S2 + S3
Pressing out from punch-rivet connections from 2-ply
sheet connections
S1
2
+ D2
1
If punch rivets are used at a later date, no use may be made of rivet inserts D1, D3 and D4. This means that it is not
possible to center the new punch rivets.
2
Position the die for the setting procedure in the deformation which has been created by pushing out through the
metal sheet on the die side.