13
4.3.8
4.3.7
4.3.10
4.3.9
4.3.11
4.4.1
4.3 Filling with blasting medium
Fig. 4.3.7
Check sealing cap. The seal must be clean
and must not show any signs of damage.
Fig. 4.3.8
Place the cover on the tank.
Fig. 4.3.9
Engage the swivelling screw fitting.
Fig. 4.3.10
Tighten eye bolts by hand.
Fig. 4.3.11
3-way ball valve in “Depressurise” position.
Fig. 4.4.1
Connect the suction hose to an industrial
vacuum cleaner.
Make sure that the suction hose is
firmly and securely connected to the
vacuum cleaner.
Check device for leaks!
If compressed air is leaking from the device, you must stop work and
eliminate the cause!
4.4 Connecting the suction hose to the suction unit