User Manual - Network Mini Dome Camera - CD1002F2-EI(S)
36
Address via the software as an example to introduce the IP address
modification.
Steps:
1.
Run the software.
2.
Select an activate device.
Note:
Please refer to Chapter 3.2 to activate the camera if the camera is
inactive.
3.
Change the device IP address to the same subnet with your
computer by either modifying the IP address manually or checking
the checkbox of Enable DHCP.
Figure 3-5
Modify the IP Address
4.
Input the password to activate your IP address modification.
The batch IP address modification is supported by the software.