17
www.tkequip.com
(956) 796 - 9411
12. REPLACEMENT
Parts
Tolerance or Replacement Cycle
Engine Components
✓
Refer to your engine manufacturer´s Owner´s Manual
V-Belts
✓
Replace if stretched to the point that the idler does not
work properly. Replace the V-belts if they are cracked
or torn.
Blades
✓
Replace if blade present any missing segments or stress
cracks.
Arbor
✓
Replace arbor if: blade become loose or saws blades
break constantly.
Hardware
✓
Re-torque all bolts after the first eight hours of
operation and check hardware every 25 hours. Replace
any worn or damaged hardware as needed.
Replacement hardware should be grade 5 and zinc
plated.
Safety Decals
✓
Replace if they become aged, damaged or cannot be
easily read.
13. EQUIPMENT SPECS
MODEL
BBS20 E5
BBS20 GH13
MAX Blade Capacity
in (cm)
20” (50)
20” (50)
Operating Weight
lbs. (Kg)
580 lbs. (263)
580 lbs. (263)
Motor/Engine RPM
1725 RPM
3600 RPM
Depth of Cut
14” – 5 in
20” – 8 in
14” – 5 in
20” – 8 in
Dimensions
LxWxH in (cm)
62”x25”x55”
(157)x(63)x(140)
62”x25”x55”
(157) x(63)x(140)
Water Pump source
Electric Powered
Engine Powered
Engine Power
5 HP (1PH/3PH)
Baldor
GX390 Honda
Blade Guard
1 Piece
1 Piece
*For Electric Motors
•
If 14” blade is used. Pulley size must be
5” diameter
•
If 20
” blade is used. Pulley size must be
3-
1/2” diameter
*For Gas engines
14”-20” blade pulley size remains the same
4-
1/4” diameter.
