www.tkaudio.se
Hook up a guitar pedal
Use it as a 4 channel Di-box
Re-amping
Impedance and level matching
Adjust the send level so you
don’t overload the pedal, then
use the gain for level make-up
after the pedal.
1. Hook up your guitar and amp with a “Y”
splitter connected to the Transceiver 2 return.
Adjust the amp for your wanted sound and
use the Transceiver2 gain control to adjust the
level of the direct guitar signal that feeds your
2. The guitar signal can also be fed through your DAW
and then back to the amp.
Lower the send level control and move the cable that
feeds the amp to the send output instead. Now adjust
the send control so you get the same amp level as you
got when the amp was connected to the “Y” splitter.
By connecting the amp this way you can recreate the
sound from this set-up 100% by feeding the recorded
direct signal to the amp again (as long as the amp is the
same and controls adjusted the same).
Because of the high input impedance (1 Mohm)
it’s a perfect Di-box for bass and guitars with
passiv pickups. The balanced output can easily
drive a 600 ohm transformer balanced preamp
input.
Use your balanced studio gear on stage.
Use it as
a Di-box
with high
driving
capability.
