CARE & INSTRUCTION MANUAL
Product:
Awning
Vehicle:
Generic
Part No.
620RTA140 / 620RTA200 / 620RTA250
File No. NPFI-001 rev1
Page 4 of 6
Date: 20/03/2020
7)
Installation
a)
Before installing awning, determine suitable location to mount brackets supplied, ensuring that
brackets are spaced no more than the below from each end.
(1)
620RTA140- no more than 450mm from each end.
(2)
620RTA200- no more than 650mm from each end.
(3)
620RTA250- no more than 800mm from each end.
b)
Using 2 x M6 bolts & nyloc nuts per bracket, attach bracket to suitable location & height to allow
doors on your vehicle to open without fouling awning.
c)
Slide M6 bolts into top track on back of main extrusion & repeat above step to bottom track.
d)
With the assistance of another person, lift awning & line up the bolts in awning track to brackets &
secure with M6 nyloc nuts.
e)
Tighten all M6 fasteners to 9Nm.