5/7
ATTENTION
：
DANGER OF LIFE
！
RISKOF FIRE
！
RISK OF SHORT CIRCUIT
！
ATTENTION
：
DANGER OF LIFE
！
RISKOF FIRE
！
RISK OF SHORT CIRCUIT
！
ATTENTION
：
FRAGILE!
RISK OF SHORT CIRCUIT
！
When exchanging the lamp be sure to use suitable lamps only. Lamps with greater
performance generate excessive heat for the product; risk of fire! Damage resulting
from the use of an unsuitable lamp is exempt from warranty!
Never connect the lighting effect to the mains prior with opened housing.
8. Fuse
Disconnect the product from the mains prior before changing a fuse.
Only replace the fuse by a fuse of same type and rating! An incorrect fuse could
damage of destruct the lighting effect.
Replace a fuse by levering the fuse holder cover with an appropriate screw driver.
Remove the old fuse and place the fuse inside the holder. Replace the fuse holder
and insert it.
Never connect the lighting effect to the mains prior with opened housing.
9. Cleaning
The product must be freed regularly from dust, other deposits and contamination as
this may reduce the protective insulation,which may lead to a fatal electric shock!
Before cleaning,always disconnect the product from mains!
This product should be cleaned with a moist cloth only ;never use aggressive
cleaning agents, solvents or benzine for cleaning.
Ensure that the product is completely dry before operating it again again after
cleaning!
To avoid damage caused during transport, wrap the product in its original
packaging only and handle it with great care during transport!
10.
Menu settings:
1. Version: brand, model, version, number, lamp use time
2. Address: Set DMX address
3. Pan reverse: On (reversed) Off (normal)
4. Tilt reverse: On (reversed) Off (normal)
5. Pan/Tilt speed: from 01-16, to set the speed for Pan/Tilt movement
6. Pan/Tilt mode: 8bit, 16bit, when set as 8bit, the channels Pan fine and Tilt
fine will be disabled, the fixture has 13 channels now.
7. Lamp mode: On (lamp on); Off (lamp off)
8. Reset: lighting reset; time restore (can be set password afterwards to
prevent unwanted modifying); Motor restore (can be set password
afterwards to prevent unwanted modifying); exit.
9. Channel data: 01: Shutter; 02: Dimmer; 03: Lamp/reset; 04: Pan/tilt speed;
05: Pan; 06: Tilt; 07: Pan fine; 08: Tilt fine; 09: Color wheel; 10: Gobo; 11:
Gobo effect; 12: Prism/macros; 13:Prism rotation; 14:Focus; 15:Focus
fine; 16: Fog; 17:Exit.
When connected with a DMX controller, the channel value can not be
changed, only show channel DMX value. While there is no DMX
controllers, you can control the fixture by this item, select some channel,
roll the encoder wheel to adjust DMX value,
10. Display: language(English Chinese or some other language according to
your requirement ); Backlight time: open(always on ), 30 seconds;
Back-brightness: 1-4, from dark to bright; exit.
11. Motor adjust: 01: Strobe; 02: Pan; 03: Tilt; 04: Color; 05: Gobo; 06: Prism;
07: Prism rotation; 08: Focus; 09: Fog; 10:Motor zero(can be set password
afterwards to prevent unwanted modifying); 11:Save (can be set password
afterwards to prevent unwanted modifying); 12: Exit.
12. Control: Control select(DMX,
Slave
, Music, Auto, these function have not
been finished now, they would be finished afterward according to your
suggestion); auto run program(select the program you want to run in
certain mode); auto run speed (set running speed for program).
13. Help info: include copyright, company information, etc.
14. Exit
