Tivoli Audio Music System Plus, Owner'S Manual

Page: 13 / 112

13 – ENGLISH
CD Menu
In CD mode, press and hold the volume knob on the Music , or press and hold the Menu
button on the remote control, to enter the main menu. Rotate the knob and press in to change the
items within the menu, or use the remote’s
pq
buttons and Select button.
1.
SCROLLING TEXT: Press the Select button and use the up/down arrow and Select buttons
to choose between CD scrolling text On, Off, or Static (text will be displayed but will not scroll).
Not all CD’s show CD text.
Bluetooth Operation
Prior to pairing, verify your device supports Bluetooth 2.1+EDR A2DP and your device is not con-
nected to any other Bluetooth product. Devices may pair differently. Below is a general guide.
1. Turn on the Music to the Auxiliary position. This will power on the Bluetooth. Turn the
volume up about ¼ to start. Also turn up the volume on the source device (the device you are
streaming from).
2. Turn on the Bluetooth wireless technology on your enabled device.
3. Select “Tivoli Bluetooth (Not Paired)” when it appears on your device’s screen to initiate search-
ing. Some devices may prompt you for a PIN. If so, enter “0000”. “Tivoli Bluetooth” will change
from “Not Paired” to “Connected”.
4. You will hear a ring tone from the Music confirming connection and you can begin
playing your music files wirelessly. Adjust the volume level on your device. You should not have
to pair your device again.
Depending on your device, you may need to make multiple
attempts at Pairing and/or Connecting to the Music , but please give your device
adequate time to Pair or Connect before repeating the process.
Pairing A Bluetooth Wireless Technology Enabled
iPhone/iPod touch/iPad
1. Turn on the Music to the Auxiliary position. This will power on the Bluetooth. Turn the
volume up about ¼ to start. Also turn up the volume on the source device (the device you are
streaming from).
2. Select “Settings”. (Depending on software version)
3. Select “General”.
4. Select “Bluetooth”.
5. Switch Bluetooth “On” to initiate searching.
6. Select “Tivoli Bluetooth (Not Paired)” when it appears on the display. If you are prompted to
enter a PIN, enter “0000”. “Tivoli Bluetooth will change from “Not Paired” to “Connected”.
7. You will hear a ring tone from the Music and you can begin playing your music files wire-
lessly. Adjust the volume level on your device. You should not have to pair your iPhone/iPod/iPad
again.
The volume output level of music files varies. If you prefer an even higher output level, check the settings
in your iPhone/iPod touch/iPad: Set the EQ Off, the SoundCheck Off, and the Volume limit Off.
If you encounter a problem Pairing, press the small arrow to the right of “Tivoli Bluetooth” on your
iPhone/iPod touch/iPad display and select “Forget this Device”, then repeat the Pairing process.
Depending on your device, you may need to make multiple attempts at Pairing and/or Con-
necting to the Music , but please give your device adequate time to Pair or Connect
before repeating the process.