9 – ENGLISH
Getting Started:
Prior to pairing, verify your device supports Bluetooth
Version 2.1+EDR A2DP and your device is not connected
to any other Bluetooth product. Devices may pair
differently. Below is a general guide.
1.
Connect the included external adapter to the 5V
input on the back of the BluCon and plug the other
end into a wall outlet. The Tivoli Audio logo will not
illuminate until the BluCon connects to a device.
Use only the power supply provided with this
product. Should the power supply become
damaged or misplaced, use only a like replacement.
Use of any DC adapter not recommended by the
manufacturer/not meeting this specification may
cause a safety hazard.
2.
Connect the included audio cable from the “Line
Out” on the back of the BluCon to the Auxiliary
input on the back of your Tivoli Audio radio or other
audio device. Turn the radio (or other device) on
and raise the volume about 1/4 to start.
3.
Turn on the Bluetooth wireless technology on your
enabled device. Select “Tivoli Bluetooth (Not Paired)”
when it appears on your device’s screen to initiate
searching. Some devices may prompt you for a PIN.
If so, enter “0000”. “Tivoli Bluetooth” will change
from “Not Paired” to “Connected”. The Tivoli Audio
logo will illuminate. You can begin playing your music
files wirelessly. Adjust the volume level on your device.
You should not have to pair your device again.
Summary of Contents for BiuCon
Page 1: ...BluCon Wireless Music Receiver OWNER S MANUAL TM ...
Page 2: ......