Titley Scientific Australia
PO Box 133
Lawnton QLD 4501
T: +61 07 3881 5577
E: [email protected]
Titley Scientific USA
601 Business Loop 70, Suite 105
Columbia, Missouri, 65203-2546
T: +1573 442 8745
E: [email protected]
Titley Scientific UK|EUROPE
Llanmaes Estate Office
St Fagans, Cardiff, CF5 6DU
T: +44 2920 022 099
E: [email protected]
A
NABAT
SYSTEMS
A
nA
B
At
™ R
oost
L
oggeR
- Q
uick
s
tARt
g
uide
OPERATION (CONT’D)
Starting up Sampling Regime on SD card
• Use CFCread version 4.4j or later
• Click on Sampling - opens Wizard
▫
Choose total run time, click “Next”
▫
Choose time of day to sample, click “Next”
▫
If required, provide Latitude, Longitude and Time
Zone, click “Next”
-
Latitude in degrees and decimals (po sitive
latitude reading is northern hemisphere)
-
Longitude in degrees and decimals (positive
longtitude reading is east of England)
-
Time Zone in hours ahead of GMT (may use
decimals)
▫
Choose battery capacity, click “Finish”
▫
Select a folder for storing a log file (you can store it
anywhere)
▫
OK
• Be conservative in setting battery capacity
▫
If battery does not achieve rated capacity, monitor-
ing will stop earlier than expected
Starting Roost Logger
• Insert batteries
▫
Make sure batteries make contact at each end
▫
Heartbeat LED (red) will flash twice per second
• Insert SD card
▫
SD LED flashes rapidly three times then off
▫
Heartbeat LED also off
• Close lid
• Check operation with magnet
Deployment
• Point front surface of microphone towards bats
• Avoid obstructions in front of microphone
• Ensure Roost Logger is securely positioned in a safe place
away from any potential damage by falling objects
• Avoid directing towards obvious noise sources such as
cascading or dripping water
• Avoid likely habitat of ultrasonic insects
• Where possible, protect from direct impacts of weather
• Use horizontal microphone alignment when feasible
• Elevate detector above ground if feasible
www.titley-scientific.com
|
2
