Quick Guide
Titathink IP Cameras
TT520PW / TT521PW / TT522PW
TT6x0W / TT6x0CW
TT7x0PW / TT7x0LPW
TT52xG / TT52x-LTE / TT8x0G / TT8x0-LTE
Standard & Pro Version
Includes: Camera unit / Power Adapter / Mounting bracket / Antenna / Manual
Ethernet Cable / Screws
1-1. Interfaces for Spy Series
1-2. Interfaces for Indoor Series
1-3. Interfaces for Outdoor Series
1-4. Interfaces Description
2-1. Initialized Connection for Spy Series
2-2. Initialized Connection for Indoor Series
2-3. Initialized Connection for TT7x0PW
Reset
DC 12V
LAN
I/O
Reset
DC 12V
LAN
I/O
General I/O
General I/O
General I/O
TT520W / TT520PW
TT521W / TT521PW
The length of the camera cable is 20 feet. Please don't extend this cable more than 38 feet!
Lens unit
TT6x0W
TT7x0PW
TT7x0LPW / TT8x0G
TT7x0LPW / TT8x0
TT7x0PW
TT6x0W
TT6x0CW
TT52xPW
TT6x0CW
Base unit
TT522W / TT522PW
TT525PW
LAN Port
Reset Button
DC Power Socket
NOTE: The SD card slot is built in the inner of camera body. Please see the connection figures to check.
The Reset button of TT7x0LPW / TT8x0G can also be found in the inner of camera body.
Line-in / MIC
CAM
Micro SD
Line-in / MIC
CAM
Micro SD
SIM Card Slot
This slot is only built in 3G/4G hidden cameras:
TT52xG / TT52x-LTE (x means 0/1/2/5).
Microphone Jack
RJ11 CAM Port
Warning:
Ensure the camera cable good contact to this port,
otherwise, the camera will show you a black
screen.
Micro SD Card Slot
WiFi Antenna Socket
WiFi Antenna
WiFi Antenna
Camera cable
LAN cable
LAN cable
LAN cable
NOTE:
The external microphone
must require an external
power adapter. This should
come with the microphone.
Lens unit
Main unit
Power adapter
Power adapter
Power adapter
Explore more details of connection
External Microphone
Router
Router
Connect to router just for initialized
setup. (
Recommended
)
After setup, disconnect this cable
to let camera work via Wi-Fi.
！
！
！
Warning:
TT525PW doesn't have the jack
because it has a built-in microphone
in its lens unit.
！
！
Reset Button
DC Power Socket
This interface is used to connect external
alarm devices such as:
1. PIR sensor
2. Gas detector
3. etc.
+12V DO DI GND
After the camera is turned on, by
pressing the button 10 seconds at
least then release, the camera will
erase all of the previous settings
and restore it default settings.
This indicated light is used to state the
working status. Please see the section
"
1-5. Check Power Indicated LED
".
The light sensor determines whether turning on/off
night vision feature.
The provided power adapter
should be plugged into this
power socket.
It requires DC 12V, 1A power
source.
LAN Port
This port is RJ45 jack and requires an
LAN cable
for the
initialized setup. Or stay connected via Ethernet cable as:
1. Wired connection.
2. PoE connection.
NOTE: Don't plug the camera cable into the LAN port if the
camera is TT520, TT521, TT522 (Standard & Pro version).
NOTE: TT6x0W, TT6x0CW don't support PoE connection.
！
A famale style of RCA audio line-in port.
It requires an external CCTV microphone which has
a male RCA plug.
No need further setup, just plug-and-play.
A 3.55mm headphone jack. It requires
standard headset plug so it can be
connected to a speaker / headset to
broadcast the sound.
RJ11 CAM Port
The provided lens unit part must be connected to
this CAM port.
Warning
: Ensure the camera cable of lens unit
good contacts to the CAM port, otherwise, the
camera will show you a black screen.
This slot is used to carry a micro SD card to store
video files. The SD card must meet requirements
below:
1. The capacity up to 128Gb.
2. Class 4 or better.
3. Must be FAT32 format.
！
！
！
3. You will also need
1-5. Check Power Indicated LED
Internet
********
Password:
A Smart Device
Smartphone such as iPhone or Samsung
or other Android phone.
Tablet such as iPad or Android tablet.
Your Wi-Fi Password
The password of Wi-Fi broadcasted by the
same router which the camera is plugged
into.
The smart device have to install an APP called
Anyscene
. This app is available to download on
Google Play and Apple APP Store.
By searching the "Anyscene" on Google Play or
APP Store, you will be able to install the app onto
your smart device.
Anyscene
Ensure you have finished the above
steps before get started setting up the
camera.
We assume the name of WiFi network
being broadcast is TOTOLINK.
Next, make sure your phone has been
connected to the Wi-Fi "TOTOLINK".
WARNING
:
*This should be the same Wi-Fi
network being broadcast from the
same router.
*This Wi-Fi network cannot be an
invisible Wi-Fi network due to the
camera can not join it.
#1
Run the Anyscene APP on the phone.
Tap "Add" or button to add your camera.
#2
Tap "Search" button to discover your camera.
For the Android phone, Tap "Scan local network"
#3
Tap the listed UID number to add camera.
If there is nothing found, you need to recheck the
wired connection between camera to router.
#4
4-1. Quick Setup to Smartphone
RESET
POWER
RESET
V1
Light Sensor
Light Sensor
1
DC Power Socket
1
1
3
3
3
5
5
6
7
General I/O
7
8
Microphone Jack
8
10
11
11
11
9
9
7
7
6
6
6
6
5
5
5
3
3
3
4
4
4
4
4
4
1
1
1
1
2
2
2
2
2
2
LAN Port
2
Infrared
LEDs
Infrared
LEDs
Infrared
LEDs
Infrared
LEDs
Light Sensor
Light Sensor
Light Sensor
LAN Port
LAN Port
LAN Port
LAN Port
Audio Line-out
9
Audio Line-out
9
10
Audio Line-out
Audio Line-out
DC Power Socket
DC Power Socket
DC Power Socket
DC Power
Socket
Speaker
WPS LED
WPS Button
Reset Button
Reset Button
Reset Button
Reset Button
Microphone
Microphone
Microphone
Microphone
Microphone
8
Power
Indicated
LED
5
Power Indicated LED
5
Power
Indicated
LED
Power
Indicated
LED
Power Indicated LED
Power Indicated LED
Power
Indicated
LED
Lens
Lens
Lens
Lens
Micro SD
Card Slot
Micro SD
Card Slot
Micro SD
Card Slot
Micro SD Card Slot
Micro SD Card Slot
SIM Card Slot
(Only for TT8x0G/LTE)
SIM Card Slot
RESET
Warning: Don't plug camera cable into LAN port!
！
The SIM card must be provided by the mobile carrier of your country.
POWER
Black status:
No power or the indicated LED
was disabled on app.
Keep green status:
Camera is starting up,
please waiting.
Green flashing:
Camera is working properly
and is standby.
Green fast flashing:
Someone visits the camera.
POWER
Power adapter
LAN cable
Router
PC
Connect to router just for initialized setup. (Recommended)
After setup, disconnect this cable to let camera work via Wi-Fi.
Directly connect to PC if there is no router.
For more details, please see
"
Setup via Computer
".
Internet
Micr
o SD
OR
Two ways to set up the camera
Two ways to set up the camera
Two ways to set up the camera
Router
Router
PC
PC
Connect to router just for initialized setup. (Recommended)
After setup, disconnect this cable to let camera work via Wi-Fi.
Directly connect to PC if there is no router.
For more details, please see "
Setup via Computer
".
Internet
OR
2-4. Initialized Connection for TT7x0LPW / TT8x0G / TT8x0-LTE
Setup via Computer
Power adapter
LAN cable
LAN cable
Router
PC
Connect to router just for initialized setup. (Recommended)
After setup, disconnect this cable to let camera work via Wi-Fi.
Directly connect to PC if there is no router.
For more details, please see the "
Setup via Computer"
.
Internet
Router
OR
Directly connect to PC if there is no router.
For more details, please see
"
Setup via Computer
".
Camera requires setup before using, you need to follow next sections to use the
provided LAN cable to connect to a router or a computer first.
After setup is completed, you can disconnect the LAN cable to let camera work
on wireless mode.
！
！
Before you get started setting up the camera to connect a Wi-Fi network, you
need to make sure the Wi-Fi SSID is not 5GHz Wi-Fi network. Or the Wi-Fi setup
will be failure.
Next sections will guide you how to add camera to Anyscene app and set up the
WiFi connection. The guidance of next sections will base on the case which that
the camera connects to the router (Not computer).
Micro SD
OR
SIM
NOTE:
This SIM card slot is only
built in TT8x0G or TT8x0-LTE
You may have no a router
to set up the camera, there is another way to set up
camera. You need to prepare a computer which has a LAN port as well.
Please refer to following steps to set up the camera via a computer.
You need to change the IP address of computer to
192.168.168.200
Connect the camera to the LAN port of computer via LAN cable. Power on
camera and wait about 1 minute then go ahead.
Open a browser and enter
http://192.168.168.100
. You will get the welcome
page of the camera. *If the welcome page can not be showed, please use Chrome
or Safari to try again, meanwhile, please lower the security level of browser and
ensure the firewall doesn't block the camera.
Enter the username and password to login. (The default username and password
are both 'admin').
You can browse the right sidebar to see "Network"->"Wireless Setup"-> You can
set up the WiFi for camera in that page.
For more details, please visit:
http://support.titathink.com/docs/titathink-hidden-cameras/
setup-via-web-application/1-access-web-application/#access-web-without-router
After you have done, please disconnect the LAN cable between camera and
computer, then camera will be able to work wirelessly. You can follow next
sections to add camera to your mobile devices.
IF YOU HAVE A ROUTER, PLEASE SKIP THIS SECTION AND JUST CONNECT
THE CAMERA TO THE ROUTER VIA A LAN CABLE.
Titathink
Cameras
1
2
3
4
5
6
Open
Lock
Lock
Open
See the
reverse side
1
2
3
4
POWER
DO
DI
GND
