28
www.titathink.com
Wi-Fi Setup
If you forget to set your camera Wi-Fi in the process of adding
camera, you can follow below steps to set your camera wifi
connection.
Please connect your camera to your router as shown in
"Connection Diagram"on page 13, and make sure your smart
device or your computer and the camera are in the same local
network. and ensure your WiFi is available.
Set your camera to connect to your home Wi-Fi
Run the 'Anyscene' App on your smart device, in My Camera page, select
your camera, 'Edit camera'
-
>'Advanced setting'
-
>'Network Setup'
-
>'WiFi
Networks'
After the camera completes scanning available Wi-Fi networks, Please
select desired network SSID, and enter the Wi-Fi password to Join. If the
camera can connect to your wifi network successfully, there will be a icon
on the right side of the network, then please remove the network cable and it
should work wireless after a short delay.
For iOS or Android smart Device
Summary of Contents for TT520G
Page 61: ...61 www titathink com ...
