TitanTec TT-BC620T, Instruction Manual

Page: 9 / 17

GENERAL WORKING INSTRUCTION
AVOID KICKBACK
The best protection is to avoid situations that lead to setback s.
1.Keep the position of the upper guide rail always in mind.
2.Be especially careful when cutting in affected areas.
3.Cut only one branch at a time.
WARNING ABOUT SOUND AND VIBRATION
1.Wear ear-muffs
The impact of noise can cause damage to
hearing.
2.Reduce noise generation and vibration to a minimum!
OTHER BASIC SAFTY RULES
5. FOR SAFE OPERATION
QUICK RELEASE
CUTTING ATTACHMENT GUARD
data. If an incorrect or faulty guard is fitted this
can cause serious personal injury.
Use only equipment that is in perfect condition.
Maintain and clean the equipment
regulary.
Adopt your way of working to the equipment.
Do not overload the equipment.
Have the equipment checked if necessary.
Switch off the equipment when not in use.
Wear gloves.
There is an easily accessible, quic release fitted
at the front as a safety precaution in case the
engine catches fire, or in any other situation that
requires you to free yourself from the machine
and harness. See instructions under the heading
Adjusting the harness and brush cutter.
Check that the harness straps are correctly
positioned. Once the harness and machine have
been adjusted, check that the harness quick
release works correctly.
This guard is intended to prevent loose objects
from being thrown towards the operator. The
guard also protects the operator from accidental
contact with the cutting attachment.
Check that the guard is undamaged and not
cracked. Replace the guard if it has been exposed
to impact or is cracked.
Always use the recommended guard for the cutting
attachment you are using. See chapter on
Technical data.
Never use a cutting attachment without an approved
guard. See the chapter on Technical
1.Please note that some national regulations may
restrict the use of the machine.
2.Subject the brush cutter/grass trimmer to a visual
inspection before each use.
Before starting work, after tank filling, after impact or
dropping:
Check the cutting tools for secure seating,
general visual check for cracks and damage.
Immediately replace damaged or blunt cutting
tools, even in the event of minor hairline cracks.
Sharpen cutting tools (also when required)
3. Parts replacement
Never use without properly mounted blade
guard!
Only use original parts for accessories as well
as for wearing and spare parts. Spare parts are
available from your specialized dealer.
Have your brush cutter/grass trimmer serviced
only by qualified personnel and by use of
original spare parts only. This ensures that the
machine will work safety in the future.
Replace damaged or worn parts with match
ing spare parts they are in the shape and size
of the original parts as necessary.
08