Titaniumbaby 5930, Instructions For Use Manual, Page: 25 / 28

NL EN
Important note:
It is suggested that the two buckle latches are inserted into
buckle to avoid missing. (fig.21)
9 .3 Seating your child in the child car seat
9.3.1 Adjust backrest to make sure it touches carseat closely.
Put the car seat on car seat facing forward and adjest the backrest alon the
Rotate bar(S) to make the backrest touch closely the carseat. (fig. 3)
9.3.2 Place your child in the child car seat.
9.3.3 Route the diagonal and lap belts correctly
9.3.3.1 Make sure there is no twist of car belt. Route the diagonal belt
through the belt guide(C,H) for child in the
meanwhile, route lap belt under armrest on seat base. (fig.22)
9.3.3.2 Make sure that both diagonal and lap belt must go under armrest.
(fig.24)
9.3.3.3 Check and make sure there is no twist of the belt. Insert the metal
tongue of carbelt into the carseat buckle until you hear a clear “click”.
(fig.9)
Warning! If your child’s head grows out car seat headrest, please
use the car seat as booster for Group III.
10. Installing your child car seat and securing your child for
Group III(22kg-36kg)
10.1 Removing the backrest
10.1.1 Push backrest and seat unit apart.The seat may click loudly.The
two section should come apart.Reattach the Velcro tab at the back
of the booster seat if it has come undone.The booster seat is now ready
to use . (fig.27,28)
10.2 Routing the diagonal and lap belts correctly
10.2.1 Make sure there is no twist of car belt. Route the diagonal belt on
the shoulder of your child and lap belt under the armrest of car seat on one
side. Make sure both diagonal and lap belt must go under armrest. (fig.24,
25)