Public
INSTRUCTION
3 (13)
Prepared (Subject resp)
No.
ETHBAAT Jeno Balasko
1/1531-CRL 113 200/6 Uen
Approved (Document resp)
Checked
Date
Rev
Reference
ETHLEL Elemer Lelik
ETHGRY
2018-05-16
D
1
Introduction
1.1
Overview
This document describes obtaining the TITAN TTCN-3 Test Executor
software, installing the Test Executor and all of its components, setting the
user environment, and licensing mechanism.
1.2
Target Groups
This document is for all audience who intend to create and execute
simulations.
1.3
Typographical Conventions
This document uses the following typographical conventions:
•
Bold
is used to represent graphical user interface (GUI) components
such as buttons, menus, menu items, dialog box options, fields and
keywords, as well as menu commands. Bold is also used with ’+’ to
represent key combinations. For example,
Ctrl+Click
•
The ‘
/
’ character is used to denote a menu and sub-menu sequence.
For example,
File / Open
.
•
Monospaced
font is used represent system elements such as
command and parameter names, program names, path names, URLs,
directory names and code examples.
•
Bold monospaced font
is used for commands that must be entered
at the Command Line Interface (CLI), For example,
ttcn3_start
1.4
Prerequisites
The supported platforms are Solaris, Linux and Cygwin (on Windows
platforms).
The following are required for proper operation of the TITAN:
•
Openssl-devel 0.9.8k or higher
•
Libxml2-devel 2.7.1 or higher
•
JDK 1.5.0_10 or later (only required if the JNI-based executor in the
Executor plug-in is used. JNI cannot be used on Cygwin.)
Note:
If the platform has other, but compatible, version of above tools, TITAN
will be built with those.
