Titan TTB823HDC, Manual

Page: 19 / 32

EN
19
In
more
detail...
TTB823HDC by TITAN
Fig. 5
0-15˚
Fig. 6
Fig. 7
5. Do not rush and do not attempt to cut too much with one stroke of the cutting
device.
6. First cutting both sides from the bottom upwards to the top. This will prevent
any of the cuttings falling into the path of the area still to be cut (Fig. 5).
7. After cutting the sides proceed to the top. Try to keep the cutting device
angled at approximately 15° to the cutting surface (Fig. 6).
8. When cutting wide hedges with the cutting area in sight move the cutting blade
lightly through the cutting surface in a sweeping motion following the shape of
the hedge or shrub. A slight tilt downwards of the cutting blade in the direction
of motion is recommended for optimum cutting performance.
9. Cut in a number of stages to achieve a better result rather than trying to cut
in one go if the area being cut is particularly long (Fig. 7); smaller cuttings will
allow for easy composting.
NOTE: When shaping it is advisable to achieve a trapezoidal shape
(Fig. 8). A trapezoidal cut corresponds to the natural growth of plants
and results in optimal hedge growth, as it will expose more light to the
lower end of the hedge.
Operation