ROTARY HAMMER 700W TTB589SDS
7
daily basis and the choice of tool.
Further advice can be found at www.hse.gov.uk
Vibration total values (triax vector sum) determined according to EN 60745:
Hammer drilling mode (For main handle) Vibration emission value a
h,HD
=14.0m/s
2
Uncertainty K = 1.5 m/s
2
Chiseling(For main handle) Vibration emission value a
h,Cheq
= 13.1 m/s
2
Uncertainty K = 1.5 m/s
2
Hammer drilling mode (For auxiliary handle) Vibration emission value a
h,HD
=9.9 m/s
2
Uncertainty K = 1.5 m/s
2
Chiseling(For auxiliary handle) Vibration emission value a
h,Cheq
= 9.7 m/s
2
Uncertainty K = 1.5 m/s
2
The declared vibration emission value should be used as a minimum level and should be
used with the current guidance on vibration.
The declared vibration emission been measured in accordance with a standardised test
stated above and may be used to compare one tool with another tool. The declared vibra-
tion emission value may also be used in a preliminary assessment of exposure.
WARNING!
The vibration emission value during actual use of the power tool can differ from the de-
clared value depending on the ways in which the tool is used dependent on the following
examples and other variations on how the tool is used:
How the tool is being used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles.
And the tool is being used as intended by its design and these instructions.
While working with this power tool, hand/arm vibrations occur. Adopt the correct
working practices in order to reduce the exposure to vibration.
This tool may cause hand-arm vibration syndrome if its use is not adequately man-
aged.
WARNING!
Identify safety measures to protect the operator that are based on an estimation of expo-
sure in the actual conditions of use (taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is running idle in addition to the trig-
ger time).
