OPERATION
Observe correct mains voltage:
The voltage
of the power source must agree with the voltage
specified on the nameplate of the machine.
Equipment marked with 230 V can also be
connected to 220V.
WET VACUUMING
Danger of explosion and fire! Do not
vacuum inflammable or explosive fluids;
for example, petrol, oil, alcohol, solvents.
Do not vacuum hot or burning dust. Do not
operate the machine in rooms where the
danger of an explosion exists.
The machine is intended for vacuuming air
and water mixtures. The machine is not to
be used as a water pump.
1. The dust bag (10) must be removed before wet
vacuuming.
2. Pull the supplied foamed plastic filter over the
filter basket for wet vacuum-cleaning. (Fig 7)
Attach the blower head.
3. Switching On and Off
To
start
the machine, set the On/Off switch to
I
.
To
switch off
the machine, set the On/Off switch
to
0
.
Note:
When the maximum filling height is
reached, switch off the machine immediately.
Before opening and emptying, always pull the
plug from the socket outlet.
DRY VACUUMING
1. Slip the dust bag onto the socket for dry
vacuum-cleaning. The dust bag is suitable only
for dry vacuum-cleaning.
2. To insert the dust bag, slide the cardboard
frame fully onto the connection piece inside of
the container. Attach the blower head. (Fig 8)
3. Switching On and Off
To
start
the machine, set the On/Off switch to
I
.
To
switch off
the machine, set the On/Off switch
to
0
.
Fig 7
Fig 8
11
TVC100P-M-070924.indd 10
2007-9-24 19:30:04
