Operation
-----------------------------------------------------------------------------------------------------------------------------------------
3. Use a slow, deliberate action to cut heavy
growth. The rate of cutting motion will depend
on the material being cut. Heavy growth will
require slower action than will light growth.
4. Never swing the unit so hard as you are in
danger of losing your balance or control of the
unit.
5. Try to control the cutting motion with the hip
rather than placing the full workload on the arm
and hands.
6. Take precautions to avoid wire, grass and dead,
dry, long-stem weeds from wrapping around the
head shaft. Such materials can stall the head and
cause the clutch to slip, resulting in damage to
the clutch system if repeated frequently.
ADJUSTING THE LINE LENGTH
• Your brush cutters is equipped with a semi-
auto type nylon line head that allows the
operator to advance the line without stopping
the engine. When the line becomes short, lightly
tap the head on the ground while running the
engine at full throttle.
• Each time the head is bumped, the line
advance about 1 inch(25.4 mm). For better effect,
tap the head on bear ground or hard soil. Avoid
bumping in thick, tall grass as the engine may
stall by overload.
■
METAL BLADE USAGE
WARNING
• When sharpening, removing, or reattaching
the blade, be sure to wear thick, sturdy gloves
and use only proper tools and equipment to
prevent injury.
1. Check the bolt to fasten the blade and be sure
the bolt has no fault, and no abrasion.
2. Be sure that the blade and the holder have
been fastened according to instruction and the
blade turns smoothly without abnormal noise.
