12v Output (+)250ma
(see notes)
ACTIVE RF ANTENNA**
NOTE:
The jumpers control the output from the
PINK/WHITE
wire on
the main 6- pin harness. This is an
30amp relayed output
.
*The factory default setting of the Selectable Output jumper is position #3.
Output on Pink White Jumper position
Second Starter Position 1
Second Accessory Position 2
Second Ignition Position 3
**The antenna MUST be connected for the system to operate
*
The center pin of the keyless entry harness is ONLY available with plug-in
devices such as the INV200US, PDLM3, or PDLMRUS.
Overloading this output will damage the remote starter.
Status Led’s
1
2
3
1
2
3
4
1
2
3
Program Button
WHITE/VIOLET
BLACK
RED
Ground While Running Output (-)250ma
Ground Output (-)250ma
12Volt Output (+)250ma
GREEN
RED*
BLUE
Door Lock Output (-)250ma
Door Unlock Output (-)250ma
Wiring Side Connectors
1 2
3
Jumpers
INSTALLATION MANUAL
TS141A REMOTE STARTER
