1. Discharge Cap
2. Nozzle
3. Wand Extension
4. Wand
5. Handle
6. Trigger
7. Trigger Lock
8. High Pressure Hose Connection
9. “O” Ring
1
2
3
4
5
6
7
8
9
6
Soap application
To activate your Titan Pressure Washer for cleaning purposes you must have your unit
in the Low postion. Low position is obtained by first locating the discharge cap (see figure
#1). On the discharge cap there is an arrow that has two settings on it, low and high. Set
your discharge cap to the low position and you are ready for soap appliction.
* Your soap application will only work in the low position*
