OFF
ON
How to Change the Vacuum Bag
Always operate the vacuum cleaner with a vacuum bag installed.
Bags should be changed when they are 2/3 full.
How to Change the Vacuum Bag
1. Unplug the vacuum cleaner. Remove the bag compartment cover
and remove the used bag from the bag holder (Fig. 1).
2. Attach the new vacuum bag onto the bag holder (Fig. 2).
3. Pull the bottom corners of the new vacuum bag (Fig. 3).
4. Reinsert the tabs on the end of the bag compartment cover into the
grooves on the bag compartment housing. Press it into place and
fasten the bag compartment cover latch tightly (Fig. 4).
Fig. 1
Fig. 3
Fig. 2
Fig. 4
Model TC6000
The vacuum cleaner and the handle are packed separately.
1. Remove the handle screw, insert handle into the hole on top of the
vacuum cleaner. Make sure that the cord hook on the handle is
positioned to the back of the vacuum cleaner (Fig. 1).
2. Line up the small hole on the handle with the small hole on the
vacuum cleaner and insert the screw. Make sure the screw is
tightened securely.
How to Attach the Extension Power Cord to the Cord Lock
1. Connect the extension power cord to the pigtail cord on the vacuum.
2. Snap the extension power cord into the slot on the end of the cord
lock.
3. Turn the knob on the bottom of the cord lock to tighten the lock and
prevent the cords from pulling apart (Fig. 2).
How to Attach the Cord Retainer to the Handle
1. Pull apart the rounded end of the cord retainer to open it up enough
to fit around the vacuum handle (Fig. 3).
2. Attach the cord retainer around the vacuum handle.
3. Create a loop in the power cord and push it through the slot and
over the hook of the cord retainer (Fig. 4).
4. Pull down on the power cord to remove any slack (Fig. 5).
On/Off Switch (Fig. 6)
1. To turn the vacuum on, push the switch located on the dust
compartment to the ( I ) position.
2. To turn the vacuum off, push the switch located on the dust
compartment on the ( 0 ) position.
Fig. 6
How to Assemble and Operate the Vacuum
Fig. 4
Fig. 2
Fig. 3
Fig. 5
7
Fig. 1
