10
”
MITRE SAW SF2541
Note:
The blade securing bolt has a left hand thread.
Remove the blade, (we recommend the use of a
stout glove for this). Clean any saw dust and debris
from the arbor and saw blade securing flanges.
To refit the blade follow the above procedure in
reverse order. If you take the inner flange off to
clean re-fit as shown in fig17.
MOVING THE SAW
1.When transporting the saw between locations
make sure that: 1. The saw head is locked in the
lower position.
2.The rotary table lock handle, the head tilt
clamping knob and the slide rod-locking lever are
all securely tightened.
3.You use the transportation handle to lift the saw.
Do not lift the saw by the switch handle.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your Local Authority or retailer for recycling
advice.
Summary of Contents for SF2541
Page 1: ...10 MITRE SAW SF2541 SAFETY AND OPERATING MANUAL ...
Page 16: ......
