Titan ParaMax, Owner'S Manual

Page: 3 / 10

3
Introduction
The Titan ParaMax suspension has be designed to give extreme suspension travel, high lift, vertical
king pin position through entire suspension travel as well as allowing freedom of the axle to
displace different heights vertically from side to side. These benefits allow for improved ride
comfort, increased ground clearance when lifted, reduced tire wear, minimal maintenance, less
stress on axle, suspension and trailer all increasing the longevity of the trailer and its components.
Suspension Operation
The controls of the Titan ParaMax Suspension are in the stainless steel box on the driver's side.
There is a push/pull knob or switch to raise or lower the suspension depending on the vehicles load
requirements which can manually raise and lower the suspension from ride height to the lifted
position. There is also a pressure regulator and air gauge to control the load carried by the
suspension. The following pressure versus load charts are shown below in Table 1 for each ride
height. RH=Ride Height.
Table 1
Titan ParaMax Suspension - TP-01-1650 Titan ParaMax Suspension - TP-01-1675
Pressure Load on Ground @ 16.50" RH Pressure Load on Ground @ 16.75" RH
psig lb kg psig lb kg
20 5950 2699 20 5950 2699
30 8150 3697 30 8150 3697
40 10150 4604 40 10150 4604
50 12350 5602 50 12350 5602
60 14450 6554 60 14450 6554
70 16850 7643 70 16850 7643
80 18950 8596 80 18950 8596
90 21150 9594 90 21150 9594
100 23750 10773 100 23750 10773
Titan ParaMax Suspension - TP-01-1700 Titan ParaMax Suspension - TP-01-1725
Pressure Load on Ground @ 17" RH Pressure Load on Ground @ 17.25" RH
psig lb kg psig lb kg
20 5750 2608 20 5750 2608
30 7550 3425 30 7550 3425
40 9750 4423 40 9750 4423
50 11950 5420 50 11950 5420
60 14150 6418 60 14150 6418
70 16350 7416 70 16350 7416
80 18350 8324 80 18350 8324
90 20550 9321 90 20550 9321
100 22950 10410 100 22950 10410