NetUSB-400i USB Server User Manual
5
Installation
Note:
The default configuration for the NetUSB-400i USB server is
DHCP
enabled. If
the USB server is not able to get an IP address from a DHCP server, it will use the IP
address
169.254.10.10
.
Do not connect your USB device(s) to the USB Server until you have
finished installing the USB Server software and hardware!!!
Step 1
- Connect the NetUSB-400i USB Server to your Network
First connect an Ethernet cable to the NetUSB-400i USB Server's Ethernet port.
Once the Ethernet cable is connected, connect the other end of the cable to your
network. This can be a free Ethernet port on your DSL router, Ethernet Hub/Switch, or
an 802.11n router/ base station.
If you do not have a network, you can connect the USB Server directly to the Ethernet
port on your computer using a Cross-Over cable.
