Titan 5059340339016, Original Instructions Manual

Page: 37 / 180

37
TTB2700PRW byTITAN TTB2700PRW byTITAN
EN
In
more
detail...
Problem Possible cause Solution
4. Strong
pressure
fluctuations
4.1. Nozzle clogged
4.2. Water inlet volume is
too low
4.3. High-pressure hose is
leaking
4.4. Seals worn
4.5. Inlet water filter is dirty
4.6. Air being sucked into
the system
4.1. Clean the nozzle
4.2. Increase water inlet
quantity
4.3. Replace high-pressure
hose
4.4. Contact our nearest
authorised service
centre
4.5. Clean the filter
4.6. Check thickness of
hose fittings
5. Water leakage
from product
5.1. Seals worn 5.1. Contact your nearest
authorised service
centre
6. Excessive
vibration/noise
6.1. Screws and nuts
loosened
6.2. Motor problems
6.3. Water inlet volume is
too low
6.1. Check screws and
nuts for tightness and
retighten as necessary
6.2. Contact your nearest
authorised service
centre
6.3. Increase water inlet
quantity
7. No detergent
taken in
7.1. Soap tank not attached
7.2. Detergent too dense
7.3. Deposits or restriction
in detergent circuit
7.1. Attach the soap tank
7.2. Dilute with water
7.3. Flush with clean
water and eliminate
any restrictions. If
the problem persists,
contact an authorised
service centre
8. No water jet 8.1. Trigger is not squeezed
8.2. Trigger lock is activated
8.3. No water supply
8.4. Inlet water filter is dirty
8.5. Hose blocked
8.6. Nozzle blocked
8.1. Squeeze the trigger
8.2. Deactivate the trigger
lock
8.3. Check water supply
8.4. Clean filter
8.5. Check hose
8.6. Check nozzle
Troubleshooting
96262_IM_TTB2700_4L.indb 37 96262_IM_TTB2700_4L.indb 37 2021/9/16 下午5:07 2021/9/16 下午5:07