26
In
more
detail...
GB
IE
Product functions
Sanding arm adjustment
WARNING!
Always switch the product off and disconnect it from power
supply before making any adjustments!
Always ensure the sanding arm is properly secured by the locking
lever after adjustment. Never use the product if the locking lever is not
tightened!
Adjust the angle of the
sanding arm (3) to the
desired position to fit
intended operation.
> Pull the locking lever
(7) forward (Fig. 15,
step 1).
> Move the sanding
arm (3) downward to
the required position
(Fig. 15, step 2).
> Press the locking
lever (7) back in
with slight pressure
(Fig. 15, step 3). Do
not overtighten.
3
7
2.
3.
1.
Fig. 15
WARNING!
Only use the product with the sanding arm adjusted to the
position within the range as indicated in Fig. 16.
Fig. 16
Fig. 17
TTB910SDR
by TITAN