13
TTB516NAL
by TITAN
In
more
detail…
GB
Intended use
Product functions
The machine is intended for tacking of cardboard, insulating material, fabric,
thin plywood, foils, leather and similar materials and similar materials on
wooden surfaces or similar e.g. mdf, plywood; when used in accordance with
these instructions. The machine is not suitable for the attachment of wall and
ceiling panelling.
Any use beyond these parameters (different media, applied force) or any
changes to the product (use on non original accessories, alteration etc) can
lead to serious risks and is regarded as use that is contrary to the intended
purpose. The operator is liable for any damage caused by improper use, and
all main function warranty will be valid.
Loading nails
Switch off and unplug before inserting nails, turn tool upside down (Fig. 3)
Press lever (1) while pulling slider (9) backwards
．
Insert the nail strip into
magazine (8) with heads facing upward (maximal capacity 100 nails)
Push slider (9) against nailer head (4) until it snap locks.
When inserting a nail strip (not supplied with the tool) tilt the tool in such
a way, that the nail strip rests against the magazine side which corresponds
with the nail symbol on nailer head (4) nail points upward.
IE
Fig. 3
Fig. 4
>
>
>
>
IMPORTANT:
Use TACWISE 18ga Straight Nails, 15 - 25mm
only.
Warning:
The nail must be install as this method
，
otherwise
will stuck the nail.
32mm
25mm
20mm
15mm
9
8
1
4
A
B
C
32mm
25mm
20mm
15mm
