6
STEP 2: ATTACH THE SUPPORT LEG
1.
Fix the Right and Left Support Leg to the front of beam by using two sets of Hex Bolt M8x25,
Steel Flat, Flat Washer Ø8 and Lock Nut M8. Do not tighten the hardware.
2.
Secure both Support Leg with two sets of Hex Bolt M8x25, Flat Washer Ø8 and Lock Nut
M8.
3.
Tighten all hardware.
STEP 3: ADJUST THE TOW HITCH
1.
Insert Hitch Pin to Tow Hitch and secure with R Pin Ø2x60.
2.
The Tow Hitch can be adjusted by using Long Hitch Pin and R Pin Ø2x60. You can pull the tow
hitch under beam when in working position and pull out for towing.
STEP 4: OPERATION HANDLE
1.
Put the Operation Handle to Handle Base on both sides of beam when in towing position.
Summary of Contents for 198376
Page 10: ...10 PARTS DRAWING PARTS LIST...
