Titan 15 ACTIVE, Service Manual

Page: 2 / 18

1.SPECIFICATIONS
1
System Type Active 15 2-way Bi-Amplified system
Frequency Response (+/-3dB) 50-20kHz
Low Frequency Transducer
Size (mm / inches) 381mm / 15 ＂
Coil Size (mm / inches) 75mm / 3.0 ＂
Impedance 4 Ω
High Frequency Transducer
Type Compression Driver
Coil Size (mm / inches) 51mm / 2
＂
Exit Size (mm / inches) 25mm / 1
＂
Diaphragm Material Titanium
Impedance 8 Ω
High Frequency Coverage (H × V) 90 °× 60 °
Amplifiers
Low-Frequency Power Amplifier (Class D) Rated 350W RMS, 700W Peak
High- Frequency Power Amplifier (Class A/B)
Rated 70W RMS, 140W Peak
Electronic Crossover: 24dB per octave Linkwitz-Riley
Crossover Frequency 1.8kHz
Controls High ( ± 10dB) 10kHz Shelving
Equalization: Low ( ± 10dB) 100Hz Shelving
Bass Response Optimizer ("BRO $ ) circuit +5dB at 60Hz
Subsonic Filter 30Hz, Second-order filter
Amplifier Protection
Power On Protection Power switch on / off mute
Thermal Protection Amplifier shutdown, auto reset
Low Line Voltage Shut Down 60% Nominal line voltage
Driver Protection Independent LF and HF limiters
DC Protection Yes
Short Protection Yes
Clip Limiter: Turns on approx 350W output
Limiter Indicator Red LED
Power Indicator Blue LED
Inputs
Input A % type Switchable balanced mic or line level input
Input Sensitivity Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms)
Maximum Input Level +22dBu
Input Connector XLR / 1/4 ＂ Combo jack
Input Impedance Balanced: 20k Ω - Unbalanced: 10k Ω
Maximum Input Level +22dBu