TP 500 II
35
/
70
8.5. Setting the strap thickness
Applies to the following
TP 500
units:
Order no.
Denomination
76082019100-Z TP 500 complete 19 x 1.00 mm
76082019112-Z TP 500 complete 19 x 1.12 mm
76082019127-Z TP 500 complete 19 x 1.27 mm
Remove the 6 fastening screws (items 86 + 87) from base
plate 2 (item 106), see figure.
Following that, loosen the 2 countersunk screws
(item 80) as well as the two washers (item 111);
then, you can mount the corrugated sheet.
Pay attention during mounting, that the corrugated
sheet is inserted accurately.
Pos. 103 = 1.12 mm strap thickness
Pos. 104 = 1.27 mm strap thickness
Pos. 105 = 1.00 mm strap thickness
Pos. 106
Pos. 111
Pos. 80
H TP 500 II EU 27/12
Pos. 103 / 105
(long incline forward)
Pos. 104
(short incline forward)
Summary of Contents for 0002
Page 22: ...TP 500 II 22 70 11 Konformit tserkl rung H TP 500 II EU 44 11...
Page 42: ...TP 500 II 42 70 11 Declaration of conformity of the machine H TP 500 II EU 44 11...
Page 62: ...TP 500 II 62 70 11 D claration CE de conformit des machines H TP 500 II EU 44 11...
Page 64: ...TP 500 II 64 70 12 Explosionszeichnungen Exploded drawings Vue clat e H TP 500 II EU 50 13...
