TITAN RADIO TR2X, Owner'S Manual

Page: 4 / 15

·
This device may not cause harmful interference.
·
This device must accept any interference received, including
interference that may cause undesired operation.
Note: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user's authority to operate
the equipment.
Compliance with RF Exposure Standards
Hytera's portable radio complies with the following RF energy exposure
standards and guidelines:
·
United States Federal Communications Commission, Code of Federal
Regulations; 47 CFR § 1.1307, 1.1310 and 2.1093.
·
American National Standards Institute (ANSI) / Institute of Electrical
and Electronic Engineers (IEEE) C95. 1:2005; Canada RSS102 Issue 5
March 2015.
·
Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005
Edition
RF Exposure Compliance and Control
Guidelines and Operating Instructions
To control your exposure and ensure compliance with the
occupational/controlled environmental exposure limits, always adhere to the
following procedures.
Guidelines:
·
Do not remove the RF Exposure Label from the device.
·
User awareness instructions should accompany device when transferred
to other users.
·
Do not use this device if the operational requirements described herein
are not met.
Operating Instructions:
·
Transmit no more than the rated duty factor of 50% of the time. To
transmit (talk), push the Push-To-Talk ( PTT ) button. To receive calls,
release the PTT button. Transmitting 50% of the time, or less, is
important because the radio generates measurable RF energy only when
transmitting (in terms of measuring for standards compliance).
·
Keep the radio unit at least 2.5 cm away from the face. Keeping the
radio at the proper distance is important as RF exposure decreases with
distance from the antenna. The antenna should be kept away from the
face and eyes.
·
When worn on the body, always place the radio in a Hytera-approved
holder, holster, case, or body harness or by use of the correct clip for
this product. Use of non-approved accessories may result in exposure
levels which exceed the FCC's occupational/controlled environmental RF
exposure limits.
·
Use of non-approved antennas, batteries, and accessories causes the
radio to exceed the FCC RF exposure guidelines.
·
Contact your local dealer for the product's optional accessories.