Supported Clusters & Attributes
:
The below Server/Client clusters are supported by the TPZRS/HA1.2 temperature sensor:
Sensor Server Clusters
:
Cluster Name
Cluster ID
Cluster Attributes
Basic
0x0000
Application Version
Stack Version
Hardware Version
Manufacturer Name
Model Identifier
Date Code
Software Build Id
Device Enabled
Power Configuration
0x0001
Battery Voltage
Battery Percent Remaining
Battery Alarm Mask
Battery Alarm State
Battery Voltage Minimum Threshold
Battery Voltage Threshold 1
Battery Voltage Threshold 2
Battery Voltage Threshold 3
Identify
0x0003
Identify time
Commissioning Cluster
0x0015
Extended Pan ID
Channel Mask
Start-up control
Temperature Measurement
0x0402
Measure Value
Min Measured Value
Max Measured Value
Sensor Client Clusters
:
Cluster Name
Cluster ID
Cluster Attributes
OTA
0x0019
N/A
Battery Information
:
Please make sure batteries are disposed of in accordance with EC Directive 2006/66/EC, amended by EU Directive
2008/12/EC or in line with your territory battery disposal guidelines.
It is important not to short-circuit, crush, disassemble, heat above 100°C, incinerate, or expose the batteries to water. Do
not solder directly to the cell. The recommended batteries for the Titan Products wireless sensors are 3.7V 2600mAH AA
size lithium-thionyl chloride. These are not rechargeable.
All batteries should be stored in a clean, cool, dry and ventilated area. When installing or replacing a battery please make
sure the polarity is correct. Batteries are not covered by the Titan Products product warranty.
FCC Information
:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Zigbee HA1.2 Wireless Room Temperature Sensor (TPZRS/HA1.2)
