Rack Control Module
TM
Product Manual
Rev. 1.2, May 9, 2014
Page 3
T
P
M
0
0
7
1 Introduction
About This Manual
1.1
This instruction manual provides information specific to the Titan Logix Corp. Rack
Control Module
TM
(hereafter referred to as the RCM). Other peripheral equipment should
be supplied with its own instruction manual and that manual should be referred to for
proper operation of the peripheral equipment.
It is essential that this manual be read and understood for proper installation and
operation of your new Rack Control Module
TM.
This manual describes Rack Control Module operation, installation and troubleshooting.
Refer to the TD80 Installation and Operation Manual, TPM 001 for full TD80 Level
Gauging and Overfill Prevention System details.
T
HIS MANUAL INCLUDES
:
Introduction
Description of the key features and components of the
Rack Control Module.
Operation
Description of Operation and Alarms.
Installation
Description of mounting and wiring of equipment.
Troubleshooting
Description of possible problems, their probable causes,
and solutions.
Technical Reference
Technical Specification.
Disclaimer
1.2
The information in this document is subject to change without notice. Titan Logix Corp.
makes no representations or warranties with respect to the contents hereof.
Only qualified personnel should install this product. Please read this manual before installing this
product and follow all applicable safety and electrical regulati ons as required.
WARNING:
The TD80 and RCM are a secondary overfill prevention system only and does not
replace operator attention and diligent monitoring of the loading process .
