manualshive.com logo in svg

Titan GPS TT8900 Ai Cam, Quick Install Manual, Page: 1 / 6

Share
Download
Titan GPS TT8900 Ai Cam Quick Install Manual Download Page 1

CERTIFIED TRACKING SOLUTIONS 

1.780.391.3800

TOLL FREE 1.855.287.4477 (CTS4GPS)

PACKAGE CONTENTS

Installation Options

12V

GUIDE

QUICK INSTALL

TT8900AiCam

OBD ADAPTER CABLE

(OPTIONAL)

TT8900 CAMERA

WINDOW MOUNTING KIT

POWER CABLE

 STEP 1

DETERMINE REQUIRED INSTALLATION OPTIONS

 

CALL TO TEST THE DEVICE BEFORE CLOSING UP 

DASH. FAILURE TO FOLLOW  INSTRUCTIONS MAY  

DAMAGE EQUIPMENT AND VOID WARRANTY

Depending upon the requirements, the camera can be installed in the following ways.  Your package 

should include the required optional parts.

Type 1: Device with Hardwired Connection (Requires OBD Adapter Cable)

Type 2: Device with Diagnostics Cable (Requires OBD/JBUS Y Cable)

Type 3: Device Only (Direct to OBD Port)

Optional Hardware: OBD/JBUS Y Cable, OBD Adapter Cable

 STEP 2

ATTACH WINDOW MOUNT TO CAMERA

It is important to securely attach the window mount to the Camera.  Using the included Window 

Mount Kit;

 a) 

Place the included “L” bracket from the Window Mount Kit onto the camera power connection 

and tighten the security screw using the included tool.

Summary of Contents for TT8900 Ai Cam







Reviews:

No comments