6
For step 8, it is recommended that one person holds the parts while another installs the hardware.
8.
Stand a
3x3
”
UPRIGHT (13)
on top of each
SIDE LEG (2)
at the leg
’
s end where the
GUSSET PLATE
(14)
is located. Align the holes of each
3x3
”
UPRIGHT (13)
with the top two holes of their adjacent
GUSSET PLATE (14)
, and secure them with the following hardware:
M16x110 HEX BOLTS (18)
,
M16 FLAT WASHERS (19)
,
M16 SPRING WASHERS (20)
, and
M16 HEX NUTS (21)
.
9.
Using the same hardware from the previous step, attach each
LASER-CUT SIDE BRACE (15)
between an
UPRIGHT POLE (1)
and its adjacent
3x3
”
UPRIGHT (13)
.
10.
Hold a
PIPE SAFETY BAR SLEEVE (16)
between each
UPRIGHT POLE (1)
and its adjacent
3x3
”
UPRIGHT (13)
, and then slide a
PIN SAFETY BAR (17)
through the
UPRIGHT POLE (1)
,
PIPE SAFETY
BAR SLEEVE (16)
, and
3x3
”
UPRIGHT (13)
.