3
10
Hades
™
2 – Digital Recycle and Lighting
Timer with High Temp Shut-Off
The Hades
™
2 is designed to control: HID lighting, a recycling timer for pumps
or CO
2
enrichment and a nighttime output for use with a circulation fan or
heater. It can control up to 1200 Watts (600 W per outlet) of HID lighting and
incorporates an internal temperature sensor, which will automatically shut down
your lights if the ‘Maximum Temp Setting’ is exceeded. It also features: a 30
second preset time delay between the 2 lighting outputs, an internal clock with
a battery back-up and a ‘Hot Start Delay’ setting that controls the cool down
period for your lights in case of power outages. The recycling timer can be
programmed to run during the Day, Night or 24-hours and it also has a battery
back-up to retain your settings in case of power failure. The Hades
™
2 keeps
your garden growing.
Instructions for Operation
1. Securely mount your Hades
™
2 in your grow area and away from any
moisture, spray, pesticides or other materials that could harm the unit.
2. Ensure that all of the devices being connected to the controller are 120
Volt only and will not exceed the maximum amperage rating for the
Hades
™
2.
3. Connect your gear (lights, pump or CO
2
regulator, night circulation fan or
heater, etc.) to the Hades
™
2.
4. The sensor has a quick connect cord set to easily connect or move the
sensor. Secure the quick connect cord to the Hades
™
2 by plugging it in
and securing the QD screw to the unit.
5. Place the sensor in an area with good air movement, preferably at plant
height Avoid placing the sensor in direct sunlight or under direct HID
lighting.
NOTE
: Do not place sensor anywhere it might get wet. SEN-
SOR IS NOT WATER PROOF.
6. Plug the power cable into a standard 120 Volt wall outlet.
7. Using the buttons, select the Lighting Timers and Recycle Timer param-
eters to program the Hades
™
2.
The Hades
™
2 should now activate and deactivate your equipment based on
the preferred settings you selected.
OUTPUT DESCRIPTION
Lighting Output 1 & 2:
• These outlets are intended to operate your HID lights. You may use up to 600
Watts per outlet. The Hades
™
2 may also be used to operate larger lighting
banks by plugging the relay trigger cord set into this output and setting the
timer to run your lights.
Do not exceed 600 Watts per outlet when using
these outputs.
Warranty Information
• Titan Controls
®
warrants the original purchase of this product against defects in
material and workmanship under normal use for three (3) years from the date
of purchase.
• During the warranty period, Titan Controls
®
will, at our option, and without
charge, repair or replace this product if the controller or any of its components
fail or malfunction.
• All returns or repairs must be accompanied by a Return Merchandise Authori-
zation (RMA) number prior to any service of the product.
• This warranty is in lieu of all other warranties, expressed or implied, including
the warranties of merchantability and fitness for use, and of all other obligations
or liabilities on the part of the seller.
• This warranty shall not apply to this product or any part thereof, which had
been damaged by accident, abuse, misuse, modification, negligence, alter-
ation or misapplication.
• Controllers with serial numbers or date tags that have been removed, altered or
obliterated; broken seals that show evidence of tampering; or nonconforming
parts, are excluded from coverage.
• Titan Controls
®
makes no warranty whatsoever in respect to accessories or
parts not supplied by Titan Controls
®
.
• Monetary refunds of the warranty will not be given.
• The Buyer assumes all responsibility regarding the proper use & installation of
this controller.
• All warranty service is provided through the Titan Controls
®
factory.
• This warranty shall apply only to the United States, including Alaska, Hawaii
and territories of the United States and Canada
• Defective controllers are required to be returned with the “proof of purchase/
receipt” for warranty coverage.
• For additional warranty information, contact the Titan Controls
®
Technical Ser-
vice Representative at 888-808-4826 or your local Dealer.
• NOTE: Titan Controls
®
is a Manufacturer of environmental, timing, lighting,
ventilation and CO
2
controls. All sales offerings to the public are done through
a nationwide group of Dealers. No sales offerings will be made directly to the
general public.
Service & Repair Program
• For all service and repairs, please contact by our Technical Service Repre-
sentative for troubleshooting your gear and attaining a Return Merchandise
Authorization (RMA) number, if applicable.
• All factory service & repairs will be completed within 48 hours of receipt of
controller at the factory.
• Titan Controls
®
will, at its discretion, repair or replace the controller.
• Factory calibration services are available for all Titan Controls
®
.
• Returning Units: Please contact your retail store for information regarding
returns.
