implement at any time. Never allow anyone to ride on the implement!
4. A heavy load can cause instability in driving a tractor. Make sure the front or rear of the
tractor is properly counter-balanced with weights, Always drive slowly-especially
around turns. An unstable tractor could steer badly and possibly tip over, causing
injury or death.
5. Most accidents occur because of neglect or carelessness. Keep all helpers and
bystanders at a safe distance.
6. Use stabilizer bars, adjustable sway chains, or sway blocks on your tractor lift arms to
keep the rear blade from swinging side to side. Adjust as tightly as practical for best
performance.
7. Do not operate close to ditches or creeks. Slow down when operating over rough
ground.
8. When adjusting the angle of the moldboard assembly, be sure that your feet are never
under the rear blade.
9. Be careful to avoid catching the rear blade on stumps or other immovable objects.
MAINTENANCE SAFETY
1. Keep all persons away from operator control area while performing adjustments,
service, or maintenance.
2. Periodically tighten all bolts, nuts and screws and check that all cotter pins are
properly installed to ensure unit is in a safe condition.
3. Never use your hands to locate a hydraulic leak on attachments. Use a small piece of
cardboard or wood.
4. Never replace hex bolts with less than grade five bolts unless otherwise specified.
Refer to bolt torque chart for head identification marking.
