3
OPERATIONAL
1.
The use of this equipment is subject to certain hazards which cannot be
protected against by mechanical means or product design. All operators of this
equipment must read and understand this entire manual, paying particular
attention to operating, prior to using. If there is something in this manual you do
not understand, ask your supervisor, or your dealer, to explain it to you.
2.
Personal protection equipment including hard hat, safety glasses, safety shoes,
and gloves are recommended during assembly.
3.
Never permit any person other than the operator to ride or board the tractor or
implement at any time. ALLOW NO RIDERS!
4.
A heavy load can cause instability in driving a tractor. Make sure the front or rear
of the tractor is properly counter-balanced with weights, always drive slowly-
especially around turns. An unstable tractor could steer badly and possibly tip
over, causing injury or death.
5.
Most accidents occur because of neglect or carelessness. Keep all helpers and
bystanders at a safe
6.
Tractor Horsepower Requirement: 20-40 HP per shank
7.
Recommended operating speed: 4-6 MPH