7
INTRODUCTION
APPLICATION
TITAN Standard Series Rotary Cutters (STSRC) are ideal for clearing grass, weeds, and light
brush. These cutters offer fast, clean, dependable mowing, and have been extensively
tested to ensure safety. High blade tip speeds assure a clean cut in a variety of field
conditions. This Rotary cutter is adapted for standard Category 1
–
three-point hitch or
Quick-Hitch system mounting.
It’s
recommended to equip a slip clutch PTO shaft.
SECTION 1: ASSEMBLY AND SET-UP
TRACTOR REQUIREMENTS
Tractor horsepower should be within the range noted below. Tractors outside the
horsepower range must not be used. Must be using a minimum of 40 hp when operating at
maximum capability. The lower 3-Point arms must be stabilized to prevent side to side
movement. Most tractors have sway blocks or adjustable chains for this purpose.
WARNING
To avoid serious injury or death:
Lightweight tractors with rear attached implements may need weights added to the front to
maintain steering control.
Consult your tractor Operator’s Manual to
determine proper weight requirements and maximum
weight limitations.